Gravenhurst Volunteer Fire Department
Your Muskoka Fire Safety Resource
What Type of CO Detector?
Up 'til now most CO detectors on the market for homeowners use one of three sensor types.
- The rarest type (and most expensive) use a electrolytic sensor. This sensor type is extremely selective to just detecting CO, but they are seldom found in homes due to the price,
- A detector using a colorimetric sensor measures the build-up of CO over time. They have the advantage of mirroring the effects of CO on humans thanks to this ability, but they can take up to 48 hours to reset after an alarm.
- Probably one of the most popular types contains a metal oxide semiconductor sensor. MOS detectors can also detect other gases including chlorine bleach and silicones. This does not make this detector inferior, it just means there may be another explanation in cases of false alarms.
In all cases CO detectors can be purchased in battery operated or 110volt (plug-in/wire-in) models. Which type you purchase is a personal decision based upon where you plan to locate the detector and cost. You should install a CO detector if you use a fuel burning heating source (gas, oil or wood), gas hot water heater or have an attached garage. One should be a minimum. but it is good to have one on each level of the home. The best place for installing a CO detector is in the bedroom. It is here that you are the most vulnerable to CO when you are asleep. When CO is detected, the alarm will wake you to the problem from a sound sleep.
Symptoms of CO Poisoning
- Low Concentration - slight headache and/or shortage of breath during moderate physical activity
- Higher Concentrations - Severe headache, dizziness, nausea, vomiting, mental confusion, weakness, vision and hearing impairment, collapse or fainting during exertion, loss of muscle control and/or drowsiness
- Extreme Concentration - unconsciousness, brain damage or death
If you inhale carbon monoxide, you could experience any of these symptoms. If any member of your household is affected, or if the symptoms lessen or disappear when you leave the home, you should suspect CO and take immediate action.
What Should You Do?
Carbon Monoxide can be scary. Here's what you can do if you suspect CO.- If you are seeking a peace of mind inspection call Union Gas or a certified heating contractor.
- If you have a CO concern due to a specific condition, but have no symptoms of poisoning call Union Gas or a certified heating contractor
- If you are exhibiting symptoms of CO poisoning call 9-1-1 and get everyone out of the house.
- If your CO detector alarm sounds and there are no medical symptoms, open all doors and windows and call Union Gas or a certified heating contractor for an inspection.
What Will We Do About CO?
The fire department dispatcher will first question you if there are any symptoms of carbon monoxide poisoning present. This will include questions of whether you or your family are experiencing any flu-like symptoms. (headache, nausea, dizziness or fatigue) If your answer is yes, they'll ask you to get everyone out of the house and await for the firefighters to arrive. The dispatcher will also respond an ambulance to assess you and your family's medical condition.
When the firefighters arrive they will again ask how you and your family are feeling. If any symptoms are present, they won't enter your home until they are wearing complete protective clothing, including breathing apparatus. In any case they will enter with a sensitive carbon monoxide sensor to verify whether there is any carbon monoxide present. If any is found, they will attempt to find the source and then contact the appropriate agency to deal with it.
At all times our concern will be for your and your family's safety and this concern will be reflected in any decisions that need to be made.
|
|
|
Visitor Count Since April 5, 2009Content View Hits : 77984 |
Who's OnlineWe have 4 guests online |


